#Cisco linksys wrt54gh firmware download how to
#Cisco linksys wrt54gh firmware download license

How to change the power plug configurationYou can connect the extenders built-in power plug directly to a wall power outlet. For more information, see UsingWi-FiProtectedSetup on page 7. TIPYou can also connect the range extender by using Wi-Fi Protected Setup. Your router tests the wireless connection to your relocated extender and prompts you if it needs further adjustment. Move the extender to its primary location, then click Next. Your extender is set up, and you are prompted to move the extender to its final location.ДЇor best performance, position the extender where the wireless signal of your router or access point is reliably strong (at least 60% strength).Д§. If your network is hidden (your router does not broadcast its name), click Mynetworkishidden, enter your networks information, then click OK.Д¦. Type your networks password, then click OK. Select the network to use, then click Next.ДҐ. Your extender searches for wireless networks. Connect your extender to an AC power outlet. You are prompted to plug your extender into an electrical outlet.ДЈ.

#Cisco linksys wrt54gh firmware download license

When the Setup utility starts, read the license terms, then click Next. You can move it to a different location later.Дў. Set up the extender close to the computer and router to ensure a strong wireless signal. You will need to be near the router or access point and have access to a networked computer. Insert the Setup CD into a computer that is connected to the network The green light turns on when an Ethernet device is connected and active on this port. To use Wi-Fi Protected Setup, refer to UsingWi-FiProtectedSetup on page 7.Д®thernet (green) Using Ethernet cables (also called network cables), this Ethernet port connects Ethernet network devices to your wireless network. Wi-Fi Protected Setup Button After initial setup, if you have client devices, such as wireless printers, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to automatically configure wireless security for your wireless network. You can also restore the defaults from the Administration > Factory Defaults screen in the extenders browser-based utility. Reset Press and hold this button for about eight seconds to reset the extender to its factory defaults. PowerSwitch Only featured in the European versions of the RE1000. If there is an error, the light flashes quickly (every second) for two minutes please wait and try again. When the Wi-Fi Protected Setup is successful, the light is continuously lit. Wi-Fi Protected Setup (white) When the Wi-Fi Protected Setup process is active, the light flashes slowly (every two seconds) for two minutes. If there is an error, the light flashes quickly (every second) disconnect the extender from the wall mount socket, wait two seconds, and then reconnect it. When the extender is ready for use, the light is continuously lit. Power (white) When the extender is powered on, resets to factory defaults, or upgrades its firmware, the light flashes slowly (every three seconds). After initial setup, if you have client devices, such as wireless printers, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to automatically configure wireless security for your wireless network. This light indicates power or Wi-Fi Protected Setup status. You can find more help from our award-winning, 24/7 customer support at /support.Д¬ontentsOverview.

IntroductionThis Getting Started guide can help you connect the extender to your network and solve common setup issues.